BauMausNRW NSFW GIFs and Nudes - Discover Unknown Content

Active Users

0

Media Count

6

Created On

09/19/2024

Update part 2: Building my first CAGE from 30 mm aluminium profiles. Small setback (see below). Does anyone have an idea for the lifting mechanism or the frame?

u/BauMausNRW 3 months ago

7

Update part 2: Building my first CAGE from 30 mm aluminium profiles. Small setback (see below). Does anyone have an idea for the lifting mechanism or the frame?

Update part 4: Building my first CAGE. The large cage (L) is 420 mm wide and 510 mm long. The upper gate can be lowered by 620 mm. Design profiles were installed inside where possible. The middle cage (M) with a width of 390 mm and a length of 495 mm is under construction.

u/BauMausNRW 2 months ago

26

Update part 4: Building my first CAGE. The large cage (L) is 420 mm wide and 510 mm long. The upper gate can be lowered by 620 mm. Design profiles were installed inside where possible. The middle cage (M) with a width of 390 mm and a length of 495 mm is under construction.

Update part 3: Building my first CAGE. I reduced the length of the cage I to 510 mm and integrated the back part. There will be a lowerable grid at the top. I will make the head fixation modular. Does anyone have any other ideas besides the female cage fighter plan?

u/BauMausNRW 2 months ago

52

Update part 3: Building my first CAGE. I reduced the length of the cage I to 510 mm and integrated the back part. There will be a lowerable grid at the top. I will make the head fixation modular. Does anyone have any other ideas besides the female cage fighter plan?

Update part 1: Building my first CAGE from 30 mm aluminum profiles. Foldable locks on the back that are interchangeable. Left for back width up to 390 mm and right for a width of 420 mm.

u/BauMausNRW 3 months ago

4

Update part 1: Building my first CAGE from 30 mm aluminum profiles. Foldable locks on the back that are interchangeable. Left for back width up to 390 mm and right for a width of 420 mm.

I am currently constructing my first cage from 30 mm aluminum profiles. It will also have a headbox with spy glass. What do you think of it? A friend says: You forgot two profiles at the bottom ;) What do you think?

u/BauMausNRW 3 months ago

19

I am currently constructing my first cage from 30 mm aluminum profiles. It will also have a headbox with spy glass. What do you think of it? A friend says: You forgot two profiles at the bottom ;) What do you think?

Pre-Prerelease of THE THING. Replica of the part from the first scene of my favorite porno in a slightly oversized form. It will also have a headbox with spy glass and ventilation. The main support is 2000 mm x 80 mm x 80 mm. For the backrest, I'm dismantling a flat bench covered in leather.

u/BauMausNRW 1 month ago

5

Pre-Prerelease of THE THING. Replica of the part from the first scene of my favorite porno in a slightly oversized form. It will also have a headbox with spy glass and ventilation. The main support is 2000 mm x 80 mm x 80 mm. For the backrest, I'm dismantling a flat bench covered in leather.